New skill dumped plastic refining to oil machine
Basic Info
Model No.: LJ-8
Product Description
New skill dumped plastic refining to oil machine
Working process of New skill dumped plastic refining to oil machine
1.Feeding requires 1-2 hours. Tires less than 1.4 meters can be directly fed into the tire. Large tires need to be cut and then fed; plastics are fed by automatic feeders or conveyor belts;
2. Heating takes about 6-8 hours. Normally, oil and gas will be produced when heated to 180 degrees. At 240-260 degrees, oil and gas will be produced in large quantities.
3. Cooling, oil and gas condenses into fuel oil through the cooling system;
4. During the pyrolysis and recovery of exhaust gas, in addition to oil and gas, some flammable but non-condensable gases will be generated. We call this [exhaust gas." This gas can be directly recovered for heating the pyrolysis reactor to save energy. fuel;
5. Carbon black and steel wire slagging, the end of the cracking process, oil and gas out of the reactor, the need to discharge the reactor inside the residual material, to carry out a new cracking process, these residues mainly include carbon black and steel wire used to make tire plastic.
Main components of New skill dumped plastic refining to oil machine
a. Host horizontal rotary pyrolysis processor.
b. Feeding system
c. Pressure and temperature alarm system
d. Secondary catalytic tower
e. Automatic slag removal system
f. Central electronic control system
g. Tank cooling system
h. Gas heating system (exhaust gas treatment system)
i. Dust and dust removal system
Raw material and oil output rate of New skill dumped plastic refining to oil machine
Item Raw Materials Output Tyres Steel wire tyre 40%--50% Nylon tyre ≈40% Bicycle tyre ≈35% Paper pulp Coarse material ≈15% Water washing material 23%-26% PE material ≈70% Cable skin PE cable skin ≈85% PVC cable skin ≈25% Pure rubber cable skin ≈35% Telephone wire ≈50% Life Garbage Pure Plastic Bag ≈50% Coarse material with water ≈15% Weaves & Handbags ≈60% shoes Sports shoe`s sole 27%-33% Black rubber ≈35% Gum outsole ≈45% Others Common rubber pipe ≈30% Carpets ≈35% Aluminum foil ≈30% Car glass bead ≈50% PP Beverage bottle ≈50%
Output and application of New skill dumped plastic refining to oil machine
1.Fuel oil
1) It can be used directly as a substitute for fuel for industrial or boiler heating, eg cement plants, steel mills, glass plants, etc.;
2) Can be refined into diesel for diesel fuel and diesel generator sets, ships, large-scale mechanical engineering vehicles, etc.
2. Carbon black
1) It can be used for industrial heating by pressure ball combustion. Its combustion calorific value is equivalent to that of coal, and can be directly used instead of coal;
2) The toner can be refined into different standards for additives such as paint pigments and rubber products.
3. Steel wire
1) Sold to waste recycling station
2) Sell directly to steel smelters and re-smelt
Product Categories : Waste Plastic Pyrolysis Plant